Texpa confection machine

LENGTH TO LENGTH TEXPA REVERSIBLE BED LINEN CONFECTION LINE No. 20151719, type SO 2-412-2 built in 2015 for single or double-lane production, consisting of 2 opposite fabric infeeds for reversible bed linen of identical configuration, 1 x left, 1 x right, fabric infeed in low-tension fabric accumulator, ERHARDT & LEIMER segment control roller type ELSMART here rotating slat expander device, fabric web guide ERHARDT & LEIMER KF 2020, edge trimming device, -high fabric infeed for pre-storage of fabric length approx. 5 mtr,-tension detection-seam detector-fabric infeed trimming device-transfer system-sewing station right = RV, left = backer hem-processing station-joining of zipper and insert slider-knife cover-separation of zipper and transfer into clamp system-looper and feeding into doubling as well as stacking on 2 positions-equipped for reversible bed linen as well as uninterrupted production due to fabric storage-System not suitable for jersey doubling pusher with delivery to 2 collecting positionsPRODUCTION INFORMATIONSystem suitable for reversible bed linen system not suitable for pillows-double fabric infeed for different top and bottom sides-low-tension infeed by means of compensator and transport bath, here buffer with depositor in open form and not as a hopper with relaxation belt and buffer time for up to 15 sets-automatic adjustment of the set in case of errors-clean transport due to zipper transport system-thus avoiding distortion of the fabric as transport by means of sewn-in zipper with transport hole detection capacity for production greater than 6 bed linen p/min-in 3-shift operation at 21.5 hours = approx. 12.000 bed linen units based on 16.0 mtr p/set in the width of 2.40 mtr = 6 units Production speed generally based on the size of the units GENERAL INFORMATIONFormat minimum 100 x 135 cmFormat maximum 200 x 220 cmSewing machine UNION SPEZIALCover length from fabric widthSuitable for reversible bed linenHead seam only possible with reversible bed linenCover completely sewn except for side seams. sewn down to side seamProduction approx. 7 pieces p/minFabric infeed from pallet and rollerLow-tension fabric infeed with fabric storageFabric storage at outfeedRapport recognition digital printCustomization 100 x 135, 135 x 200, 155 x 220 cm